2000 Series-High Profile Dock & Components
Float Section 72" x 120" - New Float Section
![]() |
Model FS2120
The primary component of the Connect-A-Dock system is molded of maintenance-free plastic with connector sockets for simple and extendable slip-fit connectors.
|
Float Section 48" x 96"
![]() |
Model FS2096
The primary component of the Connect-A-Dock system is molded of maintenance-free plastic with connector sockets for simple and extendable slip-fit connectors.
|
Float Section 2' x 4'
![]() |
Model FS2024
The 2 x 4 Float Section enables you to add more square footage where a small addition is needed.
|
Corner Float Section
![]() |
Model CFS2022
Adds strength, stability and extra walking space to the fingers of your dock. |
Utility Channel
![]() |
StraightModel UT2048
Add water, electrical or sewer conduit to your floating dock
|
![]() |
CubeModel UT2024
|
![]() |
CornerModel UTC2048
|
Components
2000 Series Lighthouse Utility Pedestal
![]() |
Model LHU2000
|
2000 Series Hatteras Utility Pedestal
![]() |
Model HU2000
|
2000 Series-High Profile Bumper
![]() |
|
Away With Geese
![]() |
Model AWG1020Disrupts geese sleep patterns causing them to move to another pond.
|
![]() |
Model AWGW1020Disrupts geese sleep patterns causing them to move to another pond.
|
Bench & Armrests
Flag Pole
Self-Wicking Planter
Extra Flotation
Float Connector
![]() |
Model FC2020Float Connectors are used to attach Float Sections. They are hidden from view in slip-fit connector sockets and secured with two bolts, washers and bushings. (Hardware included)
|
2" & 3" Pole Connector and Cover
![]() |
2" Model PC2022The versatile Pole Connector slip-fits into the exposed connector sockets of Float Sections and can accommodate a variety of anchoring methods, depending on your location and needs.
Maximum pole size 2-3/8'' O.D.
|
![]() |
3" Model PC2023The versatile Pole Connector slip-fits into the exposed connector sockets of Float Sections and can accommodate a variety of anchoring methods, depending on your location and needs.
Maximum pole size 3''
|
![]() |
Dual Pole Connector DPC2023Two connection points for added strength. Order separately - Two Float Connectors
Maximum pole size 3''
|
Model PC1002Cover those unsightly anchor pole tops with the easily-installed and durable Pole Cover.
|
Finishing Connector, Accessory Connector & 2000 Versatile Connnector
![]() |
Finishing Connector Model FC2000Give the side walls of your 2000 Series Connect-A-Dock an attractive finished appearance and keep debris out of the connector sockets by filling them with Finishing Connectors. (Hardware included)
|
![]() |
Accessory Connector Model AC2000Add functional and attractive accessories to the outside walls of your dock with the Accessory Connector. Items such as oak boards and bumpers can be fastened to the Accessory Connector quickly and easily. (Hardware included)
|
Cleat
![]() |
Model 8C1020
Secure anything to your dock with a durable Cleat. Molded to slip-fit in the top of the connector sockets of the Float Sections, the Cleat bolts to the structure for a strong, reliable attachment. (Hardware included)
|
Aluminum Gangway with Handrails
![]() ![]() |
3' x 8' Aluminum Gangway with Handrails - Model GWA3X8
3' x 12' Aluminum Gangway with Handrails-Model GWA3X12
3' x 16' Aluminum Gangway with Handrails -Model GWA3X16
4' x 8' Aluminum Gangway with Handrails (Shown) - Model GWA4X8
4' x 12' Aluminum Gangway with Handrails - Model GWA4X12
4' x 16' Aluminum Gangway with Handrails - Model GWA4X16
Choose between three lengths, and two widths. Connect to either 1000 Series - Low Profile or 2000 Series -High Profile in minutes. Simply attach the aluminum hinge with the bolts to your dock. Handrails included (hardware included)
|
Gangway 4' x 4' or 4' x 8'
![]() |
4' x 4' - Model GW1024
4' x 8' - Model GW1028
4' x 12' - Model GW1032
Choose between three lengths, 4’ x 4’, 4’ x 8’or 4’ x 12’, with slip resistant panels that allow water to drain off and light to pass thru. Connect to either 1000 Series - Low Profile or 2000 Series -High Profile in minutes. Only one person is needed for assembly - simply attach the galvanized hinge with two bolts and two more for the light weight aluminum framing. Panel(s) are then slid into the framing slots and its ready to use. (hardware included)
|
Extra Hardware
![]() |
Model EH2000 (for docks) Extra bolt, diamond
|
Swim Ladder
![]() |
Model SL2000
Provide swimmers easy access in and out of the water with the flip-up aluminum Swim Ladder. Its hinged design lets you lift it out of the water for easy cleaning and storage. (Hardware included)
|
Guardrail
![]() |
Model GR2044B (shown) BrownModel GR2044W White
Guardrails are sturdy and easy to assemble. Three sizes correspond with modularity of dock letting you surround any size dock. (2 Accessory Connectors and Hardware included)
|
![]() |
Model GR2067B (shown) BrownModel GR2067W White
(2 Accessory Connectors and Hardware included)
|
![]() |
Model GR2092B (shown) BrownModel GR2092W White
(2 Accessory Connectors and Hardware included)
|
Edge Bumper
![]() |
Model EB1020
Provides and edge to keep items from rolling off or used as a wheel chair stop
|
Solar Diamond Light
![]() ![]() |
Model SLD1020Light up the dock edge at night.
Two Lights per package
3.36” x 1.68 x 7.73”
(8.54 cm x 4.27 cm x 19.6 cm) |
Dock Boxes
![]() Triangular Dock Box
48.25" long x 28" wide x 30" high
Model DBT8000 |
|
![]() Rectangular Dock Box
48.25" long x 26.5" wide x 29" high
Model DBT8006 |
Unlike boats, dock boxes should not be made of fiberglass. Fiberglass needs waxing or it will chalk, spider web crack and retain dirt. On impact, fiberglass will crack and deform.
Trionic extra heavy-duty dock boxes are rotationally cast in a mold with impact-resistant polyethylene resin. The smooth exterior surface repels dirt without waxing.
|
![]() Triangular Dock Box
50" long x 29.5" wide x 32.5" high
Model DBT8004 |
|
![]() Triangular Dock Box
59.25" long x 34.5" wide x 28.5" high
Model DBT8011 |
Anchoring
2" (5.08 cm) Dead Man Collar
![]() ![]() |
Model DM2002 Note:2000 Series-Low ProfileAnchor your dock without poles. Slip the long end of the Dead Man Collar in the Pole Connector on the side of the dock and rig a weighted chain through the bottom of the collar. Fasten the chain by setting a link in the groove in the top of the collar. (Chain and weight not included) |
Stiff Arm Bracket
![]() ![]() |
Model SAB1020Anchor your dock without poles are weights with these fittings. The Stiff Arm Bracket is attached to the dock and is fitted to a connecting pole. The other end of the connecting pole attaches to a ground anchor on shore.
|
Stiff Arm Fittings
![]() ![]() |
Model SAF1020Anchor your dock without poles are weights with these fittings. The Stiff Arm Bracket is attached to the dock and is fitted to a connecting pole. The other end of the connecting pole attaches to a ground anchor on shore.
|
Piling Loops
![]() ![]() |
Attach your floating dock to a permanent structure with the Piling Loop. Bolt the bracket to the deck of the dock, loop the support around the piling (up to 18" (45.72 cm) in diameter) and connect back to the bracket. Great for fluctuating water levels. (Hardware included)
Size Model
10" (25.4 cm) PL1010
12" (30.48 cm) PL1012 14" (35.56 cm) PL1014 16" (40.64 cm) PL1016 18" (45.72 cm) PL1018 Custom sizes available
|



















































